ORION stabilisers are used with three-phase loads and single-phase loads with 100% current imbalance across the phases and asymmetrical mains voltage.
ORION voltage stabilisers require the neutral wire presence. It can also operate without neutral wire by adding a device able to generate it (D/Yn isolating transformer or neutral point reactor).
Every stabiliser belonging to this range is equipped with the same control board used on VEGA and ANTARES models, thus simplifying maintenance operations and spare parts storage.
Up to 45kVA, the stabilisers are equipped with wheels for easy handling.
An automatic circuit breaker is mounted on the regulation circuit to protect against overload and short circuit on the voltage regulator. The auxiliary circuit is protected by fuses.
The measuring instrumentation is installed on the cabinet door and consists of one multi-task digital line analyser. Such instrument is able to provide with information regarding the status of the line downstream the voltage stabiliser, such as phase and linked voltages, current, power factor, active power, apparent power, reactive power, etc.
By means of a changeover contact, the stabiliser control card allows for the acoustic signalling of the following alarms: minimum voltage, maximum voltage, internal overheating and overload on the voltage regulator. Voltage control and stabilisation, performed on the true RMS value, are managed by the digital microprocessor.
|Voltage stabilisation||Independent phase control|
|Selectable output voltage||220-230-240V (L-N) / 380-400-415V (L-L)|
|Admitted load variation||Up to 100%|
|Admitted load imbalance||100%|
|Cooling||Natural air ventilation up to 45kVA ±15% Aided with fans from 60kVA ±15%|
|Max relative humidity||95%|
|Admitted overload||200% 2min|
|Harmonic distortion||None introduced|
|Protection degree||IP 21|
|Instrumentation||Output digital multimetre|
|Overvoltage protection||Class II output surge arrestor (from 60kVA ±15%)|