IT Solutions
VPS-T Series
Online UPS 1~3kVA
- Input power factor up to 1, Low THDi (< 5%) and very high efficiency.
- AC/AC efficiency up to 95%, energy saving
- Compliance with RoHS standard, innocuous and environmental friendly
- Design in accordance to International EMC and Safety standard
VPS-R Series
Online UPS 1~10kVA
Green Power :
- AC/AC efficiency up to 93.5%, less operation cost and more energy saving
- Output power factor up to 0.9, powerful to connect more critical loads
- Input PF up 1 and THDi<5%, less power pollution and lower TCO
VRP Series
Online UPS 10~40kVA
Green Power :
- Adjustable Input and Output Configuration
- High AC/AC Efficiency up to 96%
- kVA=kW (PF=1.0) up to 40oC no derate
- Rack Compatible Design
- Supportable 4 Units Parallel
- Galvanic Isolation with Transformer (option)
Victron Rack Solution
Victron 19-inch rack solutions are available from 27U to 45U high with 600 to 1200 mm deep cabinets. Made from electro-galvanized steel sheet, 100% rust proof, these cabinets are long lasting and thoroughly engineered.
Tecned UPS
Endurance UPS
Online UPS 6-10kVA
- Output Isolation transformer
- Up to 8A battery charge current
- Low input distortion
- Built-in Static & Manual bypass.
- Touchscreen Functionality
- Isolation Transformer
- Manual & Static Bypass
- Suitable for long Backup
Endurance UPS
Online UPS 10-40kVA
- Graphic Touch screen
- Front I/O Connection
- Front Battery Replacement
- front access for all serviceable components
- Built-in LP inductor for motor loads
- Parallel architecture standard
Flex UPS
Online UPS 10-40kVA
- Programmable Input and output configuration 11/31/33
- High AC/AC Efficiency up to 96%
- Designed with ECO conservation mode
- Supports 4 Units Parallel
- Common battery parallel operation
- Programmable DC bus voltage
- Dry contacts with RS-485 (Modbus)
- SNMP with preloaded web interface (option)
TTB-i UPS
Online UPS 10-200kVA
- Adopting IGBT Rectification Technology
- High Input Power Factor
- Low Input Current Harmonics
- Online Monitoring Function in Display
X-Pnd UPS
Online UPS 60-1200kVA
- All Hot-swappable Design
- Power Factor 1 (kVA=kW)
- High Efficiency 97%
- System Parallel
- Fault Trace Management
ONV-XP UPS
Online UPS 100-1000kVA
- Built-in LP inductor for motor loads
- Hot-swappable Design
- Power Factor 1 (kVA=kW)
- High Efficiency 97%
- System Parallel
- Fault Trace Management
- Most compact 100KW module 3U
Industrial Power
Rectifier / Chargers
AC-DC
The TECNED GR(SF/D) Rectifier / Charger series is available from 24V, 48V, 110V & 220V nominal with up to 500A output in a single enclosure.
Converters
DC-DC
The TECNED CN(SF/D) converter series is available with input and output voltages ranging from 24V, 48V, 110V & 220V nominal.
Inverters
DC-AC
The TECNED OM(SF/D) inverter series is available with input voltages from 24Vdc to 220Vdc nominal and single phase output.
Industrial UPS / STS
AC-AC
The TECNED ONV(SF/D) UPS series is available with single phase and three phase input and single phase output with ratings up to 100 kVA in a single enclosure.
ABB UPS
ABB Powerwave UPS
True on-line 60-500 kVA
- Online double conversion technology
- Parallelable systems for increased redundancy
- Extendable backup time
- Ripple-free and temperature controlled battery charger
- Up to 96% efficiency across a wide load range
- Up to ≥99% efficiency in eco-mode
- Rated output power factor 1.0
- Near-unity input power factor at partial and full loads
SG Series UPS
True on-line 10-500 kVa
ABB introduces the all new SG series transformer based UPS rated from 10 kVA to 600 kVA. The Innovative eBoost technology Increases UPS Efficiency up to 99 PercentDelivering Best-in-Class with ultra-high efficiencyeBoost Technology
ABB MegaFlex UPS
True on-line UPS 1000-1500kVA
- Easily scalable solutions
- Up to 1,500 kW power protection in a single UPS with add-on modules
- Redundant power capabilities: 1,000 kW N+1, 1,250 kW N+1
- Collaborative, customer-centered approach
- Minimized energy losses, heat dissipation and electricity cost.
- Smart load-sharing optimizes energy consumption.
- Optimized system efficiency under low load conditions with ABB Xtra VFI
Batteries
Victron has a wide range of professional batteries available to install with our equipment. Good batteries are an essential part of a reliable back-up system. High quality batteries make a robust system; therefore we select our batteries with utmost care. Even though our equipment can operate with most international battery brands, based on over 30 years’ experience with assorted battery technologies we recommend the following manufacturers.
CELNED long life batteries are especially designed to back-up mission critical applications. Characteristics like high discharge current and fast recharge capability makes CELNED the ideal battery for standard UPS and DC back-up systems. The CELNED batteries are available in capacities from 12AH to 230AH for 12V blocks and up to 3000AH for 2V blocks. CELNED batteries are fully sealed and maintenance free and can be mounted in any position.
ALCAD is our top choice when Ni-Cd battery systems are required. Especially the ALCAD Vantex NG, maintenance free Ni-Cd battery systems. The Vantex new state-of- the-art design virtual eliminates the need to add water throughout the service life of the battery. Vantex NG batteries consistently test above specifications in field discharge tests, are durability with over 20 years’ service life and easy to install.
